internet/streaming
-
@voodoo said in internet/streaming:
I thought there was a thread somewhere, but I couldn't find it.
Anyway, our broadband is OK mostly around the house - we pay for 50mbps and typically get c. 35-40mbps
But the router thingee is in the front room of the house, and I can't pick up the signal from underneath the pool (where the pool kit lives) at the very back of the yard - it's probably 25m distance and an elevation drop of 5m too.
Is a range extender the best option? Just 1, sitting c. halfway between the router and the kit?
Thanks in advance
I went mesh also, I am using orbi ..works well for me. As a working from home, home office requirement, made I sure claimed at tax time too
I have also heard the google nest mesh system works well too
-
so something like this is the go?
https://www.harveynorman.com.au/tp-link-deco-ax1800-whole-home-mesh-wifi-system-3-pack.html
or
-
@voodoo pretty much just make sure it connects to the type of NBN node you have and then for me without remembering exactly was close to the below;
turn on main router,
name your wifi
change default password
turn on satelite,
sync
place satelite where required
pretend to wife you had to cable and code something difficult
and youre good to go.was not complicated for me
-
"make sure it connects to the type of NBN node you have" - can you clarify mate? We are on NBN, think we have fibre to the street then the Telstra wires down to the house
-
@voodoo Im with aussie broadband (who are very good by the way) but I believe connecting can be different if youre FFTP, FTTN or FTTC.
FTTP vs FTTN vs FTTC: NBN connections explained
If you’ve been looking at nbn™ plans, then you’ve probably come across terms ‘FTTN’, ‘FTTP’, and ‘FTTC.’ So what’s the difference between them, and will FTTC speeds and performance meet or exceed what FTTN and FTTP offer (or vice versa)? They are all types of nbn™ connections, but there are some...
For me I believe I am FTTC and if youre the same, I just plug cable directly from NBN box to router, no issues.
-
@bayimports basically the same here. I plugged the modem to the router then set the other one where I needed to extend (it checks it’s not too far away)
-
@kirwan This gives me a chance to thank you. You posted that link a while back and I went with your recommendation. I had put up with an appalling copper solution for years so maxed out at 1TBS with unlimited data but had a couple of blank spots in my house and outside.
I now have over 30 devices networked and consistently get 6-700 mbps across them all from the same set-up you have. It has pretty much transformed my home life. So thanks heaps.
-
@dogmeat said in internet/streaming:
@kirwan This gives me a chance to thank you. You posted that link a while back and I went with your recommendation. I had put up with an appalling copper solution for years so maxed out at 1TBS with unlimited data but had a couple of blank spots in my house and outside.
I now have over 30 devices networked and consistently get 6-700 mbps across them all from the same set-up you have. It has pretty much transformed my home life. So thanks heaps.
That was from a Fern recommendation too, from Crucial or NTA I forget which. It's completely changed my setup as well, glad it helped you too.
-
Yep. Mesh is definitely the way to go. I have had a deco setup going for a few years now and it has been fantastic.
A couple of points/tips.
If you have something like a Sonos system then make sure that you change that setup over to the mesh as well. All devices that need to talk to each other need to be on that same subnet. Mine was originally connected by cable direct to the router but is now piggybacked off one of the mesh units.
The only gripe I have is that 'smarthome' type devices are often limited to running on 2.4g (designed that way for greater standard signal reach) when the whole point of a mesh is that you can get stability and distance for 5g. Depending on where you want those smart devices they can be in soft patches even on your 2.4 (eg the watering system in the garden). You may need to run an extender on your router's 2.4 signal for them but then they are on a different subnet so any device controls need to go www and back to access them. (if anyone has a better solution/experience here I would love to hear)
-
@crucial said in internet/streaming:
The only gripe I have is that 'smarthome' type devices are often limited to running on 2.4g
This x 1000
I often find I can't get smart devices to connect unless I set them up direct through the router. Touch wood, so far, once I have done that I can then move them anywhere around the property. The furthest - a pond pump - would be 50 metres away.
Having a fast, stable network and then adding (lots I'm sort of an addict) of devices to it has been a game changer for me.
-
@dogmeat said in internet/streaming:
@crucial said in internet/streaming:
The only gripe I have is that 'smarthome' type devices are often limited to running on 2.4g
This x 1000
I often find I can't get smart devices to connect unless I set them up direct through the router. Touch wood, so far, once I have done that I can then move them anywhere around the property. The furthest - a pond pump - would be 50 metres away.
Having a fast, stable network and then adding (lots I'm sort of an addict) of devices to it has been a game changer for me.
So how have you added your smarthome devices? Do you have your mesh switched to 2.4?
-
@crucial Nope. As I said if I set them up direct through the router (so not the mesh network) they then seem to work on the Mesh
I had real issues when I first got fibre. I pay a fortune for the service plan I have but I was still getting shit speeds both the ISP and Chorus sent engineers out and I have loads of black spot, probably from being such an old solid house. The mesh changed everything dramatically in an instant.
-
@dogmeat said in internet/streaming:
@crucial Nope. As I said if I set them up direct through the router (so not the mesh network) they then seem to work on the Mesh
I didn't think that is possible but will investigate. It sounds to me like they are running on your 'old' network (probably because they dont need a strong signal, just taking a small instruction)
Or do you mean that you know they are on the old 2.4 but you can control via devices on the mesh?I guess that my issue is that a weak spot in my 2.4 network is where I would place a camera on the garden to keep an eye on things and decide whether to turn watering on when away. I'm thinking that a camera would need a better signal (I want good resolution).
I'm just waiting until 'smart' devices can run on 5 and then I know I have good stable coverage throughout the property. -
@crucial said in internet/streaming:
@dogmeat said in internet/streaming:
@crucial Nope. As I said if I set them up direct through the router (so not the mesh network) they then seem to work on the Mesh
I didn't think that is possible but will investigate. It sounds to me like they are running on your 'old' network (probably because they dont need a strong signal, just taking a small instruction)
Or do you mean that you know they are on the old 2.4 but you can control via devices on the mesh?I guess that my issue is that a weak spot in my 2.4 network is where I would place a camera on the garden to keep an eye on things and decide whether to turn watering on when away. I'm thinking that a camera would need a better signal (I want good resolution).
I'm just waiting until 'smart' devices can run on 5 and then I know I have good stable coverage throughout the property.@dogmeat Important ethos from IT; If it ain't broke don't fix it.
-
@crucial said in internet/streaming:
Yep. Mesh is definitely the way to go. I have had a deco setup going for a few years now and it has been fantastic.
A couple of points/tips.
If you have something like a Sonos system then make sure that you change that setup over to the mesh as well. All devices that need to talk to each other need to be on that same subnet. Mine was originally connected by cable direct to the router but is now piggybacked off one of the mesh units.
The only gripe I have is that 'smarthome' type devices are often limited to running on 2.4g (designed that way for greater standard signal reach) when the whole point of a mesh is that you can get stability and distance for 5g.
Just purchase a mesh setup that permits you to use one of the 5G bands as typically one is reserved for node backhaul. Something like Asus ZenWiFi AX
-
-
Just did some googling and it looks like google and nest mesh automatically selects the band for the device. That would explain why setup for 'smart' needs to be done at router if your phone/app has selected 5 but they run on 2.4. The smart devices would continue to talk on 2.4 but via the mesh.
Need to see how this works on Deco mesh as the mesh will at least carry the 2.4 range around the property and be suitable.
I can see how @dogmeat 's setup is probably working now. -
@crucial said in internet/streaming:
I guess that my issue is that a weak spot in my 2.4 network is where I would place a camera on the garden to keep an eye on things and decide whether to turn watering on when away. I'm thinking that a camera would need a better signal (I want good resolution).
I'm just waiting until 'smart' devices can run on 5 and then I know I have good stable coverage throughout the property.2.4G band has better range and even a 4K camera at 15fps won't come close to causing a throughput issue.
Netgear Orbi WiFi 6 Dual-Band Mesh System AX1800 RBK353
